电话Service Hotline

15120088920

Home > news > Content

company's product

Beijing Liang Industrial Precision Machine Technology Co., Ltd.
Service Hotline: 13552946620
Contact: Talk Manager
Mobile: 13717861982
Tel: 010-69395198
Fax: 010-80303272
Website: WWW.bjlgjj.com
Address: No. 1th Liu Xialou, Liyuan store village, Shilou Town, Fangshan District, Beijing
Bus line: Beijing West railway station South Square walk to six miles Qiaodong take 835 express or 917 express bus to Tian Family Garden District station to get off transfer Room 11 road to Liyuan shop East station get off
Dongguan Liang Precision machine CNC machine Tool Co., Ltd.
Contact: Manager du
Mobile: 15120088920
Fax: 0769-82752550
Address: No. 7th Xia Chun Road, Langzhou village, Changping Town, Dongguan, Guangdong Province
Bus route: Dongguan East Station take No. 6 bus to Langzhou Village station to get off

How to deal with the rust of the CNC engraving and milling machine

At present, the numerical control technology of CNC engraving and milling machine is undergoing fundamental changes, from the special closed-loop open-loop control mode to the general-purpose open real-time dynamic full-closed control mode. On the basis of integration, the numerical control system realizes ultra-thin Ultra-compacting; on the basis of intelligence, it integrates multi-disciplinary technologies such as computer, multimedia, fuzzy control, neural network, etc. The numerical control system realizes high-speed, high-precision and high-efficiency control, and can automatically correct, adjust and compensate each process. Item parameters enable online diagnosis and intelligent fault handling.
How to deal with the rust of the CNC engraving and milling machine:
The engraving and milling machine generally uses linear guide rails. The guide rails have very high precision and the surface brightness is very high. At first glance, many people think that the guide rails are made of stainless steel. In fact, this is a misunderstanding of many people. The precision linear guide cannot be made of stainless steel because of its functional characteristics, so the guide rail will rust like other materials with iron as the main element. If it is used improperly, it will cause rust on the surface of the guide rail. If you have rust on the guide rail of your engraving and milling machine, what should you do?
The first is to prevent: the corrosion of the guide rail of the engraving and milling machine has a fatal effect on the overall performance of the machine tool, so we should prevent this phenomenon as much as possible. Usually, the guide rails of each axis of the engraving and milling machine should be inspected and maintained regularly. If abnormal phenomena are found, they should be dealt with in time to find out the root cause of the problem and deal with it in time.
The second is to find out in time: When your engraving and milling machine is used in the processing of water-based cutting fluid, especially the CNC engraving and milling machine, it is necessary to pay great attention to the inspection of the guide rails, because the corrosion of the water-based cutting fluid on the guide rail is very Big. Timely discovery of problems can effectively prevent the development of rust conditions.
The third is to correctly handle the rails that have been rusted: when you find that the rails have rusted, you should judge according to the actual situation. If the corrosion of the guide rail is not serious, the impact on the machine tool is not so great. The first way to deal with it is to find the cause of the rust. Generally speaking, the rust is mainly caused by the supply of lubricating oil. In this case, we have to check whether the oil circuit is unobstructed and whether the oil pipe is broken. Another reason may be that the protective cover is not sufficiently protective, causing the cutting fluid to drip directly onto the rail surface. After processing these problems, we will put more lubricant on the rail surface, then turn on the machine to let the machine run for about 2 hours. Remember not to rub the surface of the rail with a rough material such as sandpaper, otherwise the rail will be scrapped directly. If the corrosion of the guide rail is already very serious, what you need to do at this time is to ask the professional personnel of the engraving and milling machine manufacturer to deal with it.
CNC engraving and milling machine It is a kind of CNC machine tool. The engraving and milling machine is generally considered to be a CNC milling machine that uses small tools, high power and high speed spindle motors. The advantage of the engraving and milling machine is in the engraving. If the hardness of the processing material is relatively large, it will not work. The appearance of the engraving and milling machine can be said to fill the gap between the two. The engraving and milling machine can be engraved or milled. It is a high-efficiency and high-precision CNC machine tool.