电话Service Hotline

15120088920

Home > news > Content

company's product

Beijing Liang Industrial Precision Machine Technology Co., Ltd.
Service Hotline: 13552946620
Contact: Talk Manager
Mobile: 13717861982
Tel: 010-69395198
Fax: 010-80303272
Website: WWW.bjlgjj.com
Address: No. 1th Liu Xialou, Liyuan store village, Shilou Town, Fangshan District, Beijing
Bus line: Beijing West railway station South Square walk to six miles Qiaodong take 835 express or 917 express bus to Tian Family Garden District station to get off transfer Room 11 road to Liyuan shop East station get off
Dongguan Liang Precision machine CNC machine Tool Co., Ltd.
Contact: Manager du
Mobile: 15120088920
Fax: 0769-82752550
Address: No. 7th Xia Chun Road, Langzhou village, Changping Town, Dongguan, Guangdong Province
Bus route: Dongguan East Station take No. 6 bus to Langzhou Village station to get off

What should I pay attention to when maintaining the CNC engraving and milling machine? How to maintain it?

Smooth through the guide rails, reducing frictional resistance and friction and wear to prevent low speed enthalpy and lower temperature rise at high temperatures. Regarding the sliding guide rail, the smooth oil is smooth, and the rolling guide is smooth oil or smooth grease. The oil of the guide rail is generally smooth and active. In operation and operation, we should pay attention to the diverter valve in the active smooth system. If it fails, the guide rail will not be active and smooth.

It is necessary to check the amount of oil in the smooth oil tank of the guide rail every day. If the oil quantity is not enough, the smooth oil should be added in time. At the same time, pay attention to whether the smooth oil pump can be started and stopped on time, and pay attention to whether it is possible to check the punctuality. Supply smooth oil.
The engraving and milling machine is a widely used CNC machine tool in the industrial automation, different processing, but also needs to do the self-maintenance function of the machine itself, so we are indispensable after the use of CNC engraving and milling machine the elements of.
1. First of all, the maintenance work of the CNC engraving and milling machine is to start from the initial installation. Here is the work of cleaning the machine and the protection of the shaft guides that should be done before installation.
2. Daily maintenance is an important part of maintenance work. Every day, we must work cleanly in the working environment, the machine tool is clean and tidy, and all aspects of the machine tool are working normally. In use, we should pay attention to the smooth discharge of the cutting fluid. After the end of the work, the workpiece scraps on the machine tool must be cleaned. In addition, it is necessary to refuel the machine parts in time according to the regulations during the operation.
3, the regular maintenance of the engraving and milling machine essential factors, the regular maintenance of the engraving and milling machine is about two or three months to be carried out, this maintenance needs to be thorough inspection and cleaning of the machine and the inspection of machine performance.
Therefore, the maintenance of the CNC engraving and milling machine is also carried out every day at the beginning of the installation, which will make people feel troublesome, but usually pay attention to the details and solve it. It is very easy to do these maintenance.