电话Service Hotline

15120088920

Home > Industry knowledge > Content

company's product

Beijing Liang Industrial Precision Machine Technology Co., Ltd.
Service Hotline: 13552946620
Contact: Talk Manager
Mobile: 13717861982
Tel: 010-69395198
Fax: 010-80303272
Website: WWW.bjlgjj.com
Address: No. 1th Liu Xialou, Liyuan store village, Shilou Town, Fangshan District, Beijing
Bus line: Beijing West railway station South Square walk to six miles Qiaodong take 835 express or 917 express bus to Tian Family Garden District station to get off transfer Room 11 road to Liyuan shop East station get off
Dongguan Liang Precision machine CNC machine Tool Co., Ltd.
Contact: Manager du
Mobile: 15120088920
Fax: 0769-82752550
Address: No. 7th Xia Chun Road, Langzhou village, Changping Town, Dongguan, Guangdong Province
Bus route: Dongguan East Station take No. 6 bus to Langzhou Village station to get off

Analysis of 4 Advantages of CNC Five-axis Machining Center

The CNC five-axis machining center has high technology content, high precision and wide application range. It is not only used in civil occupations, but also widely used in aviation, aerospace, military, scientific research, fine equipment, high-precision medical equipment and other occupations. Here is a brief overview of its advantages.

The CNC five-axis machining center has high technology content, high precision and wide application range. It is not only used in civil occupations, but also widely used in aviation, aerospace, military, scientific research, fine equipment, high-precision medical equipment and other occupations. Here is a brief overview of its advantages.

The five-axis machining center is particularly suitable for machining a number of messy molds with the following advantages:

1. When machining deeper and steeper cavities, it is possible to pass the additional reversal and swing of the workpiece or the spindle head to invent the best process conditions for the machining of the end mill and prevent the tool and the shank and the cavity wall from occurring. Bumping reduces the risk of chattering and tool breakage during tooling, which helps to improve the surface quality, machining power and tool durability of the mold.

2. The technology of the five-axis linkage machining center relieves the multiple commissioning of the workpiece required for repositioning the workpiece at the chaotic point of view. This not only saves time, but also greatly reduces errors and saves the expensive cost of fixtures and the like required to mount the workpiece in place.

3, to enable the machine tool to process messy parts, which is impossible to choose from other methods, including the drilling, cavity crypts and taper processing that are usually required on the messy surface.

4. After selecting a short tool, the whole part can be finished in one time, no need to re-install or select the longer tool required in the same 3-axis machining, and can work in a short time, the surface of the part The quality is also ideal.